Voice is distorted

Voice is distorted

Overview

Lower the volume level in the app to reduce clipping.

Move the mic slightly further from your mouth (6–8 inches is ideal).

Details / steps

If using noise reduction, reduce its intensity — very high levels can distort voice.



Checklist
  1. Use the VOOK app for mic controls such as volume, mute, and noise reduction.
  2. Use Enhancer for audio cleanup when internet is available.
  3. Some features depend on your VOOK mic model and receiver type.

Note:
Feature availability can vary by VOOK mic model, receiver type, phone model, camera model, and app permissions.

Need more help?

If the issue continues, contact VOOK support with your phone model, VOOK mic model, app version, screenshots, and a short sample recording or video if available.

    • Related Articles

    • Wind noise during recording

      Overview Attach the wind foam cover to the microphone — this is the most effective solution. Clip the mic inside your collar so the body blocks direct wind. Details / steps Also enable noise reduction in the app to reduce remaining wind noise. ...

    • There is continuous noise distortion in recording even with correct settings

      Overview Try the following steps in order: Details / steps Reduce volume from the app to avoid input clipping. Enable ENC noise reduction. Keep mic 6–8 inches from the speaker. Move away from WiFi routers, fans, or AC units. Check for fabric rubbing ...

    • Too much background noise

      Overview Enable ENC noise reduction in the app. Record in a quieter environment where possible. Details / steps Use the AI Enhance feature for post-processing to clean up the recorded audio further. Checklist Use the VOOK app for mic controls such as ...

    • Clothing rubbing noise

      Overview Reposition the mic clip to prevent fabric from rubbing directly against the microphone capsule. Route the cable under clothing if possible, and use the foam cover to dampen light contact noise. Checklist Use the VOOK app for mic controls ...

    • Noise cancellation (ENC) is not working

      Overview Toggle ENC OFF, wait 3 seconds, then toggle it back ON. Restart the mic and reconnect to the app. Details / steps Ensure the mic is not muted and the transmitter is fully charged — low battery can affect ENC performance. Checklist Use the ...